skip to Main Content

VPN Lock

Network Adapters

Network Adapters is used to force Koinonein to only use a particular adapter or adapters.

Most VPN’s will give you a specific adapter when you use their service and in the picture above we have chosen TunnelBear for the VPN service provider.

For Koinonein to only use TunnelBear simply go to Settings > Client Options then check the TunnelBear adapter and click Apply.

If the VPN drops out for any reason Koinonein won’t use any other adapter.

If the adapter is unavailable when Koinonein starts then Koinonein won’t connect at all.

Usage

Network adapter lock

If checked Koinonein will only use the currently checked network adapters.

If you uncheck this then that has the same effect as deselecting all adapters then clicking Apply however if you check this no change will happen until you click Apply.

There is no fall back option so if Koinonein is started and the network adapter is unavailable Koinonein won’t be able to connect until you set a new adapter or reconnect the missing adapter.

Apply

When clicked Koinonein will connect to all adapters if Network Adapter Lock is unchecked or just connect to the checked adapters if Network Adapter Lock is checked.

Changes take a few seconds to implement and existing connected peers will still continue to use the old adapter as they are not disconnected, if you want all peers to use the new adapter immediately simply stop then start the torrent or stop all torrents before clicking Apply.

You can press F9 at any time to get the currently used adapters entered into the log.

Refresh

Rechecks what adapters are available.

Back To Top

Copyright 2017 Koinonein Ltd - All Rights Reserved

Koinonein On Facebook
Koinonein On Twitter
Koinonein On Google+
Koinonein RSS
Koinonein On Google+
Koinonein RSS